Industrial dust coll PL series single bag filter

First, the structure outlined in:
This series of stand-alone basic structure of dust from the fan unit, filters and dust of three components, all components are installed in a vertical framework, steel shell, baking rust, good looks, scientific structure, reliable operation easy to use.
Structural characteristics of the various components are as follows:
1. Fan parts are imitated centrifugal fan, air volume, high pressure, hard fan characteristic curve, and using noise reduction measures, the use of noise.
2. 208 industrial filter components used for the filter material polyester twill flannel flat bag filters are installed inside each bag spring steel wire mesh, filter effects, and replace the filter bag convenience, long service life.
3. Filter cleaning body parts, is the use of motor driven eccentric wheel, jitter and link to clear the dust bag gets on the outer surface of the dust bag. The control points of two self-control and hand control. Controls that work in the fan continuously, cleaning body vibration regular automatic cleaning, manual or automatic fan stopped working after the cleaning sector, tens of seconds after the automatic cut-off, may also need to start cleaning the motor vibration at any clear gray, self-cleaning by the user adjust the length of time time relay.
4. Filter components is spacious and equipped with a sealed access door fast demolition ②, when necessary to repair and remove filters.
5. Dust collector parts are Choudou structure, clear the dust is very convenient.
6. Dust collector at the top side of the inlet air interfacesbe folded down when required to facilitate the increased use of air inlet area.
7. The existing sixteen single filter unit specifications, points A, B two types. A hopper-type set drawer, B-no ash drawers. Lower Jiafa Lan; by the user directly connected to the folding bag with mouth mouth hopper pouring, mixing libraries, sand boxes, belts and other dust transport equipment U-turn at the local dust, dust direct recycling.
8. The unit or user unit according to the practical needs of design, specific manufacturing.
Second, the working principle of:
Dusty gas into the tank, flat bag filter by the filter, the dust left in the dust bag was blocked outside the surface, has been purified gas through the bag into the fan, the fan inhaled directly into the interior (which can also take over the row to the outside .)
With the increase of filtration time, the outer surface contaminated with the dust bag is also increasing, the bag is also a corresponding increase in the resistance, thus affecting the dust, cleaning agencies regularly using controlled vibration cleaning or manual cleaning agency after the shutdown Automatic vibration tens of seconds, so that the outer surface of dip in the dust bag and shake off the dust down, fall to the dust container (drawers) in the dust cleared out by hand.
Third, the purpose:
This series of single bag filter products are widely used in foundry industry, ceramic industry, glass industry, and refractory materials, cement, grinding wheel manufacturing, chemical products, machinery processing industry, dust, etc., the product of a larger proportion of the metal chips, foundry sand, such as lathes, grinders, milling machines, grinding machines, polishing machine, etc., and the proportion of the dust medium, such as cement, ceramic powder, gypsum powder, asbestos powder, carbon black, pigments, bakelite powder, plastic powder and so on. And the lesser proportion of non-fibrous dust dust have good results, the unit collection efficiency is greater than 99.5%.